天然气在土壤中泄漏的稳态温度场分析

埋地高压天然气经小孔泄漏会导致土壤冻结形成冻土,应用一元气体动力学、流体力学和传热学知识建立了天然气小孔泄漏吸热率模型和土壤稳态温度场模型,并进行了实例计算。结果表明：当天然气输送压力小于临界压力,小孔泄漏吸热率随压力的增大而增大;当天然气输送压力大于等于临界压力,小孔泄漏吸热率达到最大值;冻土厚度随土壤热导率或空气对流传热系数的增大而减小,但土壤热导率对其影响较小,空气对流传热系数对其影响较大。     

Numerical simulation of detonation of an explosive atmosphere of liquefied petroleum gas in a confined space

The detonation of an explosive atmosphere from liquefied petroleum gas disseminated in air in a confined space is studied using numerical modeling with software product ANSYS AUTODYN.     

数值模拟气/气喷嘴速度比对燃烧性能的影响

为研究应用于全流量补燃循环发动机的不同气/气喷嘴得到的燃烧流场,通过求解NavierStokes方程组,对不同燃料与氧化剂速度比下的流动燃烧过程进行了数值计算,计算结果与实验结果吻合。仿真结果表明:增加速度比能使燃烧火焰面提前,燃烧效率变大。如果发动机的长度受到限制,可以适当增加速度比以实现高效燃烧。     

Does Intent equal Capability? Al-Qaeda and Weapons of Mass Destruction

The prospect of terrorists deploying weapons of mass destruction (WMD) is often referred to as the foremost danger to American national security. This danger has become more realistic because of al-Qaeda's expanding global network and the expressed willingness to kill thousands of civilians. In the past four years, numerous media reports have documented the group's ongoing quest for WMD capabilities; many reports have detailed al-Qaeda members’ attempts to manufacture or obtain certain chemical, biological, radiological, and nuclear (CBRN) agents to use in WMD against targets in the West and the Middle East. Yet the question remains: Does al-Qaeda's current WMD capability match its actual intent? While most studies of the group have focused on its explicit desire for WMD, allegations of CBRN acquisition, and the killing potential of specific CBRN agents, few open-source studies have closely examined the evolution of al-Qaeda's consideration of WMD and, most notably, the merit of actual CBRN production instructions as depicted and disseminated in the group's own literature and manuals. The following report will examine the history of al-Qaeda's interest in CBRN agents, the evolution of the network's attitude toward these weapons, and the internal debate within the organization concerning acquisition and use of WMD. More so, the following research will assess the validity of actual CBRN production instructions and capabilities as displayed and disseminated in al-Qaeda's own literature and websites.     

弹药洞库有害气体分布规律研究

以计算流体力学（CFD）为理论基础,应用GAMBIT软件对洞库内的有害气体进行几何模型构建和网络划分,用FLUENT软件对所建模型中有害气体的扩散和分布规律进行模拟分析,并对单一释放源条件下扩散规律进行比较,分析弹药堆垛对气体扩散的影响．通过对洞库内有害气体的整体分布规律的研究,找到了库房内有害气体浓度最高的位置．最后,通过实验对仿真结果进行验证．     

UN-Consistent: A Comparison of Australia's Military Interventions in Somalia and Rwanda

This article seeks to compare Australia's involvement in two key 1990s peace missions: those to Somalia in 1992–93 and Rwanda in 1994–95. While there are many similarities between the two missions in terms of time, scale and theatre, the differences are more important. Both missions are usually recalled as failures despite the Australian troops having been extremely successful in their roles during both deployments. Moreover the experiences with intervention in Africa seem to have forever blighted Australian participation in peace missions on that continent.     

气体炮法测评抗冲元件的动态特性

提出了一种测评抗冲元件动态特性的方法.通过气体炮发射的炮弹撞击砧块,使之获得一定的初速度,再利用砧块的惯性对抗冲元件施加冲击载荷.使用激光位移传感器和测力钢块分别测量力和位移,解决了特殊情况下数据测量的问题.     

针栓喷管技术在固体姿轨控系统中的应用研究

论述了针栓喷管技术在固体姿轨控系统中的应用,研究了针栓喷管的技术途径,防热材料选择,针栓驱动方案选择,针栓结构设计,以及多喷管系统的推力管理方案.并对在不同压强和针栓位置情况下的内流场数值模拟,最后提出针栓喷管在姿轨控系统中应用的关键技术和发展方向.     

无管网七氟丙烷灭火系统在小面积精密仪器场所的运用

小面积精密仪器场所由于其精密性和重要性,适于设置气体灭火系统。通过分析比较各种气体灭火剂、有管网和无管网气体自动灭火系统的优缺点及其性价比,得出无管网柜式七氟丙烷灭火系统是小面积精密仪器场所最合适的灭火系统。     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.